electrical · FF-0436

How is a run stand wired to the fuel pump, coil and starter?

Wires from the control panel run down to the starter, the fuel pump and the coil at the front. A green wire comes from the control panel, the yellow wire is for the fuel pump, and the pump is grounded to the engine. The positive cable goes to the starter, and the other wires come off there. There is a fuse for the fuel pump and, Steve believes, one for the coil.

Expert

Steve Coppock

Evidence

expert attributed

Component

run stand wiring

Applicable scope

Running any engine at home on a run stand, shown on Steve Coppock's ARDUN Flathead